Awọn ọja
Sensọ ile-iṣẹ 4 Layer kosemi&Flex pcb pẹlu 2oz Ejò
| Fẹlẹfẹlẹ | 4 fẹlẹfẹlẹ kosemi +2 fẹlẹfẹlẹ Flex |
| Ọkọ sisanra | 1.60MM + 0.2mm |
| Ohun elo | FR4 tg150 + Polymide |
| Ejò sisanra | 1 OZ(35um) |
| Dada Ipari | ENIG Au Sisanra 1um;Ni Sisanra 3um |
| Min Iho (mm) | 0.21mm |
| Ìbú Laini Min (mm) | 0.15mm |
| Alafo Laini Min(mm) | 0.15mm |
| Solder boju | Alawọ ewe |
| Àlàyé Awọ | funfun |
| Mechanical processing | Ifimaaki V, CNC Milling (ipa-ọna) |
| Iṣakojọpọ | Anti-aimi apo |
| E-idanwo | Flying ibere tabi Fixture |
| Ilana gbigba | IPC-A-600H Kilasi 2 |
| Ohun elo | Awọn ẹrọ itanna eleto |
Ọrọ Iṣaaju
Awọn PCbs ti o ni lile&Flex jẹ idapo pẹlu awọn igbimọ lile lati ṣẹda ọja arabara yii.Diẹ ninu awọn fẹlẹfẹlẹ ti ilana iṣelọpọ pẹlu iyika to rọ ti o nṣiṣẹ nipasẹ awọn igbimọ ti kosemi, ti o jọra
a boṣewa igilile Circuit design.
Apẹrẹ igbimọ yoo ṣafikun nipasẹ awọn iho (PTHs) ti o so awọn iyika lile ati rọ gẹgẹbi apakan ti ilana yii.PCB yii jẹ olokiki nitori oye rẹ, deede, ati irọrun.
Rigid-Flex PCBs jẹ ki apẹrẹ itanna jẹ ki o rọrun nipa yiyọ awọn kebulu ti o rọ, awọn asopọ, ati onirin kọọkan.Iyika awọn igbimọ ti kosemi&Flex jẹ diẹ sii ni wiwọ sinu eto gbogbogbo igbimọ, eyiti o mu iṣẹ ṣiṣe itanna dara si.
Enginners le reti significantly dara maintainability ati itanna išẹ ọpẹ si kosemi-Flex PCB ti abẹnu itanna ati darí awọn isopọ.
Ohun elo
Awọn ohun elo sobusitireti
Ohun elo rigidi-ex olokiki julọ jẹ gilaasi hun.Ipele ti o nipọn ti resini iposii ṣe aṣọ gilaasi yii.
Síbẹ̀síbẹ̀, gilaasi tí a kó sínú rẹ̀ nínú ipò ipò kò dájú.Ko le koju awọn ipaya lojiji ati idaduro.
Polyimide
Ohun elo yii ni a yan fun irọrun rẹ.O lagbara ati pe o le koju awọn ipaya ati awọn išipopada.
Polyimide tun le koju ooru.Eyi jẹ ki o jẹ apẹrẹ fun awọn ohun elo pẹlu awọn iyipada iwọn otutu.
Polyester (PET)
PET jẹ ojurere fun awọn abuda itanna ati irọrun.O koju awọn kemikali ati ọririn.O le nitorina ni iṣẹ ni awọn ipo ile-iṣẹ lile.
Lilo sobusitireti to dara ṣe idaniloju agbara ti o fẹ ati gigun.O ṣe akiyesi awọn eroja bii resistance otutu ati iduroṣinṣin iwọn nigba yiyan sobusitireti kan.
Polyimide Adhesives
Iwọn otutu otutu ti alemora yii jẹ ki o dara julọ fun iṣẹ naa.O le duro 500 ° C.Agbara ooru giga rẹ jẹ ki o dara fun ọpọlọpọ awọn ohun elo to ṣe pataki.
Polyester Adhesives
Awọn adhesives wọnyi jẹ fifipamọ iye owo diẹ sii ju awọn adhesives polyimide.
Wọn jẹ nla fun ṣiṣe ipilẹ awọn iyika ẹri bugbamu lile.
Ibasepo wọn tun jẹ alailagbara.Awọn adhesives polyester tun ko ni sooro ooru.Wọn ti ni imudojuiwọn laipe.Eleyi pese wọn pẹlu ooru resistance.Iyipada yii tun ṣe igbega aṣamubadọgba.Eyi jẹ ki wọn ni aabo ni apejọ PCB multilayer.
Akiriliki Adhesives
Awọn adhesives wọnyi ga julọ.Wọn ni iduroṣinṣin igbona ti o dara julọ lodi si ipata ati awọn kemikali.Wọn rọrun lati lo ati ni iwọn ilamẹjọ.Ni idapọ pẹlu wiwa wọn, wọn jẹ olokiki laarin awọn aṣelọpọ.awọn olupese.
Epoxies
Eyi ṣee ṣe alemora ti a lo pupọ julọ ni iṣelọpọ Circuit rigidi-Flex.Wọn tun le koju ipata ati awọn iwọn otutu giga ati kekere.
Wọn ti wa ni tun lalailopinpin adaptable ati adhesively idurosinsin.O ni polyester kekere kan ninu eyiti o jẹ ki o rọ diẹ sii.
Iṣakojọpọ
Awọn akopọ-soke ti kosemi-ex PCB jẹ ọkan ninu awọn julọ awọn ẹya ara nigba
kosemi-ex PCB iṣelọpọ ati awọn ti o ni diẹ idiju ju bošewa
kosemi lọọgan, jẹ ki a ni a wo ni 4 fẹlẹfẹlẹ ti kosemi-ex PCB bi isalẹ:
Top solder boju
Top Layer
Dielectric 1
Layer ifihan agbara 1
Dielectric 3
Layer ifihan agbara 2
Dielectric 2
Layer isalẹ
Isalẹ soldermask
PCB Agbara
| Kosemi ọkọ agbara | |
| Nọmba awọn fẹlẹfẹlẹ: | 1-42 fẹlẹfẹlẹ |
| Ohun elo: | FR4 \ high TG FR4 \ Asiwaju free ohun elo \ CEM1 \ CEM3 \ Aluminiomu \ Metal mojuto \ PTFE \ Rogers |
| Ode Layer Cu sisanra: | 1-6OZ |
| Layer inu Cu sisanra: | 1-4OZ |
| Agbegbe iṣelọpọ ti o pọju: | 610 * 1100mm |
| Isanra igbimọ ti o kere julọ: | 2 fẹlẹfẹlẹ 0.3mm (12mil) 4 fẹlẹfẹlẹ 0.4mm (16mil) 6 fẹlẹfẹlẹ 0.8mm (32mil) Awọn ipele 8 1.0mm (40mil) Awọn ipele 10 1.1mm (44mil) 12 fẹlẹfẹlẹ 1.3mm (52mil) 14 fẹlẹfẹlẹ 1.5mm (59mil) Awọn ipele 16 1.6mm (63mil) |
| Iwọn to kere julọ: | 0.076mm (milionu 3) |
| Aaye to kere julọ: | 0.076mm (milionu 3) |
| Iwọn iho ti o kere julọ (iho ikẹhin): | 0.2mm |
| Ipin abala: | 10:1 |
| Iwọn iho liluho: | 0.2-0.65mm |
| Ifarada liluho: | +\-0.05mm(2mil) |
| Ifarada PTH: | Φ0.2-1.6mm +\-0.075mm (3mil) Φ1.6-6.3mm+\-0.1mm(4mil) |
| Ifarada NPTH: | Φ0.2-1.6mm +\-0.05mm(2mil) Φ1.6-6.3mm+\-0.05mm(2mil) |
| Pari ifarada igbimọ: | Sisanra：0.8mm, Ifarada:+/-0.08mm |
| 0.8mm≤ Sisanra≤6.5mm, Ifarada+/-10% | |
| Afara soldermask ti o kere julọ: | 0.076mm (milionu 3) |
| Lilọ ati atunse: | ≤0.75% Min0.5% |
| Iwọn ti TG: | 130-215 ℃ |
| Ifarada ikọlu: | +/- 10%, min +/-5% |
| Itọju Ilẹ: | HASL, LF HASL |
| Gold Immersion, Gold Filaṣi, ika goolu | |
| Fadaka Immersion, Tin Immersion,OSP | |
| Pipin goolu ti o yan, sisanra goolu to 3um(120u”) | |
| Erogba Print, Peelable S/M,ENEPIG | |
| Aluminiomu ọkọ agbara | |
| Nọmba awọn fẹlẹfẹlẹ: | Layer ẹyọkan, awọn ipele meji |
| Iwọn igbimọ ti o pọju: | 1500 * 600mm |
| Isanra igbimọ: | 0.5-3.0mm |
| Isanra bàbà: | 0,5-4 iwon |
| Iwọn iho ti o kere julọ: | 0.8mm |
| Ìbú tó kéré jù: | 0.1mm |
| Aaye to kere julọ: | 0.12mm |
| Iwọn paadi ti o kere julọ: | 10 micron |
| Ipari Ilẹ: | HASL,OSP,ENIG |
| Apẹrẹ: | CNC, Punching, V-ge |
| Ohun elo: | Oludanwo gbogbo agbaye |
| Flying Probe Ṣii/Onidanwo kukuru | |
| Maikirosikopu agbara giga | |
| Solderability Igbeyewo Apo | |
| Peeli Agbara idanwo | |
| Ṣii Volt giga & Oluyẹwo kukuru | |
| Cross Section igbáti Apo Pẹlu Polisher | |
| Agbara FPC | |
| Awọn ipele: | 1-8 fẹlẹfẹlẹ |
| Isanra igbimọ: | 0.05-0.5mm |
| Isanra bàbà: | 0.5-3OZ |
| Iwọn to kere julọ: | 0.075mm |
| Aaye to kere julọ: | 0.075mm |
| Ni nipasẹ iwọn iho: | 0.2mm |
| Iwọn iho laser ti o kere julọ: | 0.075mm |
| Iwọn iho ti o kere ju: | 0.5mm |
| Ifarada soldermask: | + \-0.5mm |
| Ifarada iwọn ipa-ọna to kere julọ: | + \-0.5mm |
| Ipari Ilẹ: | HASL,LF HASL, Fadaka Immersion, Gold Immersion,Flash Gold, OSP |
| Apẹrẹ: | Punching, Lesa, Ge |
| Ohun elo: | Oludanwo gbogbo agbaye |
| Flying Probe Ṣii/Onidanwo kukuru | |
| Maikirosikopu agbara giga | |
| Solderability Igbeyewo Apo | |
| Peeli Agbara idanwo | |
| Ṣii Volt giga & Oluyẹwo kukuru | |
| Cross Section igbáti Apo Pẹlu Polisher | |
| Kosemi & agbara | |
| Awọn ipele: | 1-28 fẹlẹfẹlẹ |
| Iru ohun elo: | FR-4(Tg giga, Ọfẹ Halogen, Igbohunsafẹfẹ giga) PTFE, BT, Getek, Aluminiomu mimọ, Ejò mimọ, KB, Nanya, Shengyi, ITEQ, ILM, Isola, Nelco, Rogers, Arlon |
| Isanra igbimọ: | 6-240 mil / 0.15-6.0mm |
| Isanra bàbà: | 210um (6oz) fun Layer ti inu 210um (6oz) fun Layer ita |
| Iwọn lilu ẹrọ min: | 0.2mm/0.08” |
| Ipin abala: | 2:1 |
| Iwọn paneli ti o pọju: | Sigle ẹgbẹ tabi awọn ẹgbẹ meji: 500mm * 1200mm |
| Awọn fẹlẹfẹlẹ pupọ: 508mm X 610mm (20 ″ X 24 ″) | |
| Ibú laini min/aaye: | 0.076mm / 0.076mm (0.003″ / 0.003″)/ 3mil/3mil |
| Nipasẹ iho iru: | Afọju / sin / Plugged (VOP, VIP…) |
| HDI / Microvia: | BẸẸNI |
| Ipari Ilẹ: | HASL, LF HASL |
| Gold Immersion, Gold Filaṣi, ika goolu | |
| Fadaka Immersion, Tin Immersion,OSP | |
| Pipin goolu ti o yan, sisanra goolu to 3um(120u”) | |
| Erogba Print, Peelable S/M,ENEPIG | |
| Apẹrẹ: | CNC, Punching, V-ge |
| Ohun elo: | Oludanwo gbogbo agbaye |
| Flying Probe Ṣii/Onidanwo kukuru | |
| Maikirosikopu agbara giga | |
| Solderability Igbeyewo Apo | |
| Peeli Agbara idanwo | |
| Ṣii Volt giga & Oluyẹwo kukuru | |
| Cross Section igbáti Apo Pẹlu Polisher | |
